the Auto-Cell concept

The Auto-Cell concept, ready for your future

Customer specific

An Auto-Cell is custom-styled as the best automation solution in your situation. The economic returns are taken as a starting point.

Specification phase
Based on a representative product mix, a specification for your Auto-Cell will be prepared. This product mix is also the basis for the acceptance protocol. So you know in advance what the economic returns will be.

Acceptance protocol
After building and testing the Auto-Cell at AWL, the acceptance protocol will confirm the economic return.

Turn-Key delivery
Then the Auto-Cell will be installed at your premises in three days and handed over operational.

After-sales service
Auto-Cell can permanently serve you to obtain the maximum performance out of the cell.

Simple tooling management

With a sophisticated tooling management, based on standard tooling as much as possible, the management burden will be significantly reduced.

Cell configurations

Auto-Cell applies three basis configurations

5-axes milling
multi-tasking
customer specific operation stations

In an Auto-Cell more operation stations can be accommodated.

And as an integrated part of the cell, also finishing stations could be involved for:

degreasing
deburring
engraving
measuring

Digital environment

With a seamless link between ERP, CAM and MDE (Maschinen Daten Erfassung), a flexible real-time planning is possible.

MDE is not only used for recording standstill and continuous measurement of OEE (Overall Equipment Effectiveness), but also in order to record the actual order costs: the real-time order results.

Your existing machines could be implemented in this system, so you obtain your entire business insight and the management burden is significantly reduced.

No preliminary operation

Auto-Cell and the Tailmaker concept enable as the first on the market a cell without pallets. This avoids unnecessary operations and makes efficient 24/7 production possible.

Training & Service

Your Auto-Cell delivers its maximum efficiency if your organization is ready. Therefore Auto-Cell has extended training opportunities for your staff.

Auto-Cell also provides guidance to make your cell perform the best as possible.

To reduce standstill to an absolute minimum, Auto-Cell gives you 24 hours service opportunities.

The Auto-Cell concept, ready for your future
Customer specific An Auto-Cell is custom-styled as the best automation solution in your situation. The economic returns are taken as a starting point. Specification phase Based on a representative product mix, a specification for your Auto-Cell will be prepared. This product mix is also the basis for the acceptance protocol. So you know in advance what the economic returns will be. Acceptance protocol After building and testing the Auto-Cell at AWL, the acceptance protocol will confirm the economic return. Turn-Key delivery Then the Auto-Cell will be installed at your premises in three days and handed over operational. After-sales service Auto-Cell can permanently serve you to obtain the maximum performance out of the cell. Simple tooling management With a sophisticated tooling management, based on standard tooling as much as possible, the management burden will be significantly reduced.	Cell configurations Auto-Cell applies three basis configurations 5-axes milling multi-tasking customer specific operation stations In an Auto-Cell more operation stations can be accommodated. And as an integrated part of the cell, also finishing stations could be involved for: degreasing deburring engraving measuring Digital environment With a seamless link between ERP, CAM and MDE (Maschinen Daten Erfassung), a flexible real-time planning is possible. MDE is not only used for recording standstill and continuous measurement of OEE (Overall Equipment Effectiveness), but also in order to record the actual order costs: the real-time order results. Your existing machines could be implemented in this system, so you obtain your entire business insight and the management burden is significantly reduced.	No preliminary operation Auto-Cell and the Tailmaker concept enable as the first on the market a cell without pallets. This avoids unnecessary operations and makes efficient 24/7 production possible. Training & Service Your Auto-Cell delivers its maximum efficiency if your organization is ready. Therefore Auto-Cell has extended training opportunities for your staff. Auto-Cell also provides guidance to make your cell perform the best as possible. To reduce standstill to an absolute minimum, Auto-Cell gives you 24 hours service opportunities.